Bed Sheet Sizes Singapore: Single, Super Single, Queen, and King Guide

Buying bed sheets in Singapore is harder than matching a label. A fitted sheet must match the mattress width, length, and depth. A flat sheet needs enough fabric to drape and tuck. Duvet covers use their own dimensions, which do not necessarily match the mattress.

The safest method is simple: measure the mattress in centimetres, including any protector or topper, and compare those numbers with the seller's product chart.

Bed sheet sizes Singapore: quick chart

The mattress dimensions below are common local references. Sheet dimensions vary by brand, so the sheet columns are buying targets rather than one legal standard.

Do not use this table as a substitute for a product chart. Local bedding companies often add a small fitting allowance, while imported and IKEA products may use longer mattresses.

Why bed-sheet labels vary in Singapore

Singapore shoppers encounter several sizing systems at once:

• Common local mattress dimensions.
• IKEA metric dimensions, often 200 cm long.
• Australian, European, American, and hotel bedding sizes.
• Brand-specific deep-pocket or “plus” sizes.
• Super king labels with no single universal measurement.

For example, a common local queen mattress is about 152 x 190 cm, while an IKEA queen can be around 150 x 200 cm. Both may be sold in Singapore, but a fitted sheet cut tightly for one may not fit the other well.

Always compare numbers before labels.

Single bed sheet size

A common local single mattress is about 91 cm x 190 cm.

For a fitted single sheet, check:

• Width close to the mattress width.
• Length close to the mattress length.
• Pocket depth greater than the mattress depth, with enough extra fabric to wrap underneath.
• Whether the product is designed for a 190 cm or 200 cm mattress.

IKEA Singapore commonly sells 90 x 200 cm single fitted sheets. They are designed around IKEA's longer mattress format and may not sit the same way on a common local 91 x 190 cm mattress.

For the mattress comparison behind these numbers, use the single and super-single bed size Singapore guide.

Super single bed sheet size

A common local super single mattress is about 107 cm x 190 cm.

Super single is where label confusion becomes common. Local brands may sell fitted sheets around 107-110 cm wide and 190-193 cm long, while IKEA commonly uses a wider 120 x 200 cm super-single format.

A single fitted sheet is normally too narrow. A queen fitted sheet is usually too loose. Choose a sheet made for the actual super-single measurements.

Before ordering, compare:

• Mattress width.
• Mattress length.
• Mattress depth.
• Protector thickness.
• Topper thickness.

If the seller lists only “super single” without measurements, ask for the product chart.

Queen bed sheet size

A common local queen mattress is about 152 cm x 190 cm.

Queen fitted sheets sold by Singapore bedding brands may be slightly larger than the mattress so the elastic can wrap underneath. Deep-pocket versions can use a pocket around 40-43 cm, but products vary.

Check whether the sheet is intended for:

• A common local queen near 152 x 190 cm.
• An IKEA queen near 150 x 200 cm.
• An imported queen near 152-153 x 203 cm.
• A thick mattress with a topper.

Do not assume extra length will disappear neatly. It can bunch at the corners or pull differently after washing.

For mattress and frame measurements, read the queen size mattress Singapore guide.

King bed sheet size

A common local king mattress is about 183 cm x 190 cm.

King sheet shopping is difficult because international king dimensions differ widely. IKEA king products are commonly around 180 x 200 cm, while some imported king mattresses are around 193 x 203 cm.

For a Singapore king fitted sheet, compare exact dimensions and pocket depth. A product labelled king can still be:

• Too short for a 200 cm mattress.
• Too long for a 190 cm mattress.
• Too narrow for an imported king.
• Too shallow for a thick hybrid mattress and topper.

Use the king size bed dimensions Singapore guide before mixing local and imported bedding.

Super king bed sheet size

Super king is a product-specific label rather than one dependable standard.

Singapore bedding sellers may list super-king mattresses or fitted sheets near 200-203 cm wide and long, but the exact measurements and pocket depths differ.

If you own a super king:

1. Measure the mattress yourself.
2. Photograph the manufacturer label.
3. Include any topper in the depth measurement.
4. Compare the seller's fitted-sheet chart.
5. Check the return policy before opening or washing the product.

Custom sheets may be safer for unusual mattress dimensions.

Fitted vs flat sheet: what the measurements mean

Fitted sheet

A fitted sheet has elastic around the corners or full edge. Its key measurements are width, length, and pocket depth.

The fitted surface should align with the top of the mattress. The pocket fabric then travels down the sides and wraps underneath.

Flat sheet

A flat sheet is a rectangle without fitted corners. It can be used as a top sheet or tucked around a mattress.

The right size depends on:

• Mattress width.
• Mattress depth.
• How much side drop you prefer.
• Whether you tuck the foot and sides.
• Whether two sleepers share the sheet.

A larger flat sheet is easier to tuck, but excessive fabric can feel bulky in a compact bed frame.

Duvet or quilt cover

Duvet-cover dimensions match the duvet insert, not the mattress. A queen bed does not automatically require every product labelled queen.

Match the cover to the insert's exact width and length. If the cover is much larger, the insert can move and bunch. If it is smaller, the duvet can feel compressed.

Why mattress depth changes the sheet you need

Pocket depth is the vertical fabric available at the fitted-sheet corner.

Measure mattress depth from the bottom edge to the highest point. Add:

• Mattress protector thickness.
• Topper thickness.
• Any permanent padded cover.

A fitted sheet pocket should be deeper than the total setup so it can wrap underneath. Matching the pocket exactly to the mattress height can make the sheet difficult to install and easy to pull off.

For example:

• Mattress depth: 25 cm.
• Protector: 1 cm.
• Topper: 5 cm.
• Total setup: 31 cm.

A shallow 28 cm pocket is likely unsuitable. A deeper product gives more room to secure the elastic, but an excessively loose sheet can wrinkle.

If a topper is changing your bed height, read the natural latex mattress topper guide.

How to measure a mattress for fitted sheets

Remove loose bedding but leave on any protector or topper used every night.

Measure width

Measure straight across the widest part of the mattress. Do not include the bed frame.

Measure length

Measure from the top edge to the foot edge. Do not rely on the size printed on an old receipt.

Measure depth

Measure from the bottom seam to the highest point. Take the measurement at more than one corner if the mattress is rounded or compressed.

Compare with the product chart

Check whether the sheet dimensions describe the mattress it fits or the actual cut fabric. Retailers present these differently.

Recheck after adding a topper

A topper can turn a previously suitable fitted sheet into a shallow one. Measure the completed sleep surface.

Common sizing mistakes when buying online

Buying by label only

“Queen” and “king” vary across countries and brands. Exact centimetres matter.

Measuring the frame instead of the mattress

Sheets fit the mattress. Frame rails and headboards are irrelevant to fitted-sheet width and length.

Ignoring pocket depth

A sheet can match width and length but still pop off because the corners are too shallow.

Forgetting the topper

Protectors and toppers increase the total depth the sheet must cover.

Mixing IKEA and common local sizes

IKEA mattresses are often 200 cm long. Common local Singapore mattresses are often 190 cm long.

Washing before checking fit

Many sellers restrict returns after bedding has been opened or washed. Review the return policy and test carefully.

Assuming all super king products match

Super king is especially inconsistent. Treat it as a measured product, not a standard.

Choosing fabric for Singapore weather

Sizing comes first, but fabric and weave affect comfort in a warm, humid bedroom.

Consider:

• Breathable fibres and weaves.
• How the sheet feels with a mattress protector.
• Drying time during wet weather.
• Care-label temperature and tumble-dry limits.
• Whether deep fitted corners stay smooth.
• Whether the fabric shrinks according to the maker's care instructions.

No fabric guarantees a cool night. Room ventilation, mattress materials, protector, duvet, and sleepwear all contribute. See the cooling mattress Singapore guide.

Bed sheet buying checklist

• Measure mattress width, length, and depth in centimetres.
• Include the regular protector and topper.
• Confirm whether the mattress is local, IKEA, or imported sizing.
• Compare the seller's product chart.
• Match duvet cover to duvet insert, not mattress label.
• Check care instructions and shrinkage guidance.
• Review return rules before opening and washing.
• Save the measurements for future purchases.

Frequently Asked Questions

What are the common bed sheet sizes in Singapore?

Common fitted-sheet labels include single, super single, queen, king, and super king. Exact dimensions vary by brand, so compare them with your mattress.

What size fitted sheet fits a Singapore single mattress?

A common local single mattress is about 91 x 190 cm. Choose a fitted sheet made for that width and length with enough pocket depth.

What size fitted sheet fits a super single mattress?

A common local super single is about 107 x 190 cm. Do not assume an IKEA 120 x 200 cm super-single sheet is identical.

What is the queen bed sheet size in Singapore?

Local queen fitted sheets are commonly designed around a mattress near 152 x 190 cm, but the fabric allowance and pocket depth vary.

What is the king bed sheet size in Singapore?

Local king fitted sheets are commonly designed around a mattress near 183 x 190 cm. Imported king products can be longer or wider.

How deep should a fitted sheet be?

Its pocket should exceed the total mattress, protector, and topper depth enough to wrap securely underneath.

Can I use a queen fitted sheet on a super single bed?

It will usually be too loose in width and difficult to keep smooth. Use a fitted sheet designed for the exact super-single dimensions.

Are IKEA sheets the same as Singapore sizes?

Not always. IKEA mattresses and sheets commonly use 200 cm lengths, while many common local mattresses are 190 cm long.

Does the duvet-cover size need to match the mattress?

No. The duvet cover must match the duvet insert. Mattress size is only a general shopping category.

Should I wash new sheets before testing the fit?

Check the seller's return policy first. Opening or washing can make bedding non-returnable, and fabric may change slightly after washing.

Conclusion

The right bed sheet is chosen by measurement, not by label alone. Measure the mattress width, length, and completed depth. Check whether it follows local, IKEA, or imported sizing. Then compare the exact fitted sheet, flat sheet, and duvet-cover specifications before buying.