Lullaflex

Shop by bed setup

Custom Mattress in Singapore: Made to Measure for Your Frame, With a 10-Year Warranty

If your frame or carpentry platform isn't a standard size, Lullaflex makes its natural latex mattresses to your measurements. Standard sizes start at $889 (Moonlight) and $2,339 (Trilogy and Chiro); custom sizes are quoted per job and made in 7 to 10 working days, with delivery within mainland Singapore included. Send your measurements by WhatsApp or email, and lie on every model first at our Woodlands showroom (by appointment).

Trilogy natural latex mattress with three adjustable comfort layers

The usual problem

Where standard-size mattresses fall short

The platform comes out a few centimetres off

A built-in platform often ends up slightly off-standard once the carpentry is done. The mattress then has to be cut to size, which usually costs more and takes longer than a stock size.

Wall beds and low platforms cap the height

Wall beds sold in Singapore commonly cap the mattress at 20 to 20.5 cm, and low or tatami platforms set their own limit. Lullaflex's standard mattresses are taller than that: 22.5 cm for the Hybrid and 24 cm for the Trilogy and Chiro.

Odd frames and cavities

An imported frame built to another market's sizes, or a cavity built around a column, won't take a stock size. A Singapore Queen is 190 cm long, while EU-size frames run about 10 cm longer.

A custom order changes the dimensions and keeps the rest of the mattress. The latex is Belgian natural latex, assembled in Asia, and certified to Oeko-Tex Standard 100 and the EuroLatex Eco Standard. The Trilogy's three layers can still be reordered at home to change the feel, and each side can be set to its own firmness. Corners can be rounded to match the joinery. And if the frame turns out to be a standard size after all, the Hybrid, with its seven-zone latex comfort layer, costs $699 to $1,599 and needs no custom work.

Built for this

What every Lullaflex model is built on

ZONED SUPPORT

Seven zones in the Hybrid's latex layer

The Lullaflex Hybrid has a 2.5 cm micro-perforated latex layer split into seven zones, over a 20 cm HR foam core. Shoulders get more give and the lower back gets more hold.

  • Seven named zones, neck to foot
  • 22.5 cm, medium feel
  • From $699 for a Single
How it works

ADJUSTABLE FIRMNESS

Three latex layers you can reorder

The Trilogy has soft, medium and firm latex layers, 24 cm in all. Swap their order at home to change the feel, or order His/Hers for a different firmness on each side.

  • Soft, medium and firm layers
  • His/Hers in Queen, King, EU Super King
  • From $2,339 for a Single
How it works

BELGIAN NATURAL LATEX

Natural latex made in Belgium

The latex range's cores come from one principal supplier in Belgium, with no chalk or calcium fillers. They're washed and dried after baking, then cut and finished in Asia.

  • 100% pure natural latex
  • No chalk or calcium fillers
  • Latex range only, not the Hybrid
How it works

CUSTOM SIZE

Made to your frame's size

Every latex mattress can be made to a custom size, thickness or firmness, with rounded corners or His/Hers sides. Custom orders take 7 to 10 working days, like standard latex.

  • Custom size, thickness and firmness
  • Slimmer builds for wall beds
  • SG, EU and Wide Single sizes listed
How it works

CERTIFIED LATEX

Certified latex and fabric

The latex and mattress fabric are certified to Oeko-Tex Standard 100, renewed yearly. The latex also meets the EuroLatex Eco Standard and carries the LGA mark. These cover the latex range, not the Hybrid.

  • Oeko-Tex Standard 100, renewed yearly
  • Free from formaldehyde, organic tin, azo dyes
  • Centexbel report 8375/8276
How it works

Side by side

Check the standard sizes before paying for a customised mattress

The latex range already covers EU 200 cm lengths and Wide Single, so an imported frame may not need a custom order at all.

ModelHeightStandard sizes (cm)Price rangeMade to order
Hybrid22.5 cm91, 107, 152 or 183 wide x 190 long$699 to $1,599Custom cut possible on enquiry, not guaranteed
Trilogy24 cm190 long x 90, 106, 150 or 180 wide; EU 200 x 90, 200 x 160, 200 x 180$2,339 to $4,568Size, thickness, firmness, His/Hers, rounded corners
Chiro24 cmSame as Trilogy$2,339 to $4,339Size, thickness; His/Hers as a custom order
Starlight (kids)14 cm190 long x 90, 106, 150 or 180 wide; EU 200 x 90; Wide Single 190 or 200 x 120$1,219 to $2,019Custom size
Moonlight (toddler)10 cmSame as Starlight$889 to $1,789Custom size
Cot7.5 or 10 cm120 x 60, 130 x 70, 140 x 70, 160 x 70$369 to $789Custom size

Lullaflex published prices (latex range dated 5 Aug 2026), delivery within mainland Singapore included. Custom sizes are quoted per job; latex is made to order in 7 to 10 working days.

What to compare

Measure the inside, not the label

Measure where the mattress actually sits: inside length and width at both ends and in the middle, in case the platform isn't square, plus the maximum mattress height. Note any rounded corners so the mattress can match them.

Check the EU and Wide Single sizes

EU Single 200 x 90, EU King 200 x 160, EU Super King 200 x 180 and Wide Single 190 or 200 x 120 cm are standard on the latex range. One of them may fit without a custom order.

Check the base

Slat gaps should be 5 cm or less, which is what the Lullaflex warranty requires. Latex can sit on slats, a box foundation or an adjustable bed.

Suitability check

Is Lullaflex suitable?

A custom latex mattress suits a frame, platform or cavity that no stock size fits, as long as you can wait 7 to 10 working days and have tried the model first. If an EU or Wide Single size already fits, or you need a mattress within days, a standard size is the simpler choice.

Likely a good fit if

  • You have the finished platform or frame's internal measurements and maximum height.
  • You've lain on the model you want at the showroom.
  • You can wait 7 to 10 working days for a made-to-order mattress.
  • Your slat gaps are 5 cm or less, or the base is solid and ventilated.

Consider another option if

  • The carpentry isn't built yet, so the final size isn't known.
  • You need a mattress delivered within a few days (the stocked Hybrid takes 3 to 5).
  • You want the option of returning it: custom or not, Lullaflex mattresses can't be returned once opened.

Before you buy

Frequently asked questions

How is Lullaflex different from standard-size mattresses?

A standard mattress comes in the sizes on the price list. Lullaflex latex mattresses can be made to your exact size, thickness and firmness, with rounded corners or His/Hers sides, in 7 to 10 working days. Custom pieces are quoted per job, and like every Lullaflex mattress they can't be returned once opened, so lie on the model at the Woodlands showroom first.

Can I order a mattress in a non-standard size in Singapore?

Yes. Send the frame's internal length and width, the maximum mattress height and a photo of any rounded corners by WhatsApp (+65 8974 9376) or email (admin@lullaflex.com). Lullaflex quotes the size, and latex mattresses are made to order in 7 to 10 working days with delivery within mainland Singapore included.

Can a latex mattress be made thinner for a wall bed or low platform?

Yes. Custom thickness is available across the latex range. The Trilogy and Chiro are 24 cm as standard, and wall beds commonly cap mattresses at 20 to 20.5 cm, so confirm your frame's maximum before ordering. The wall-bed page covers the other checks, such as the lifting system.

Which Lullaflex models can be customised?

The latex range: Trilogy, Chiro, Starlight, Moonlight, the cot mattress and the playpen mattress. The Hybrid is stocked in four Singapore sizes; a custom cut may be possible on enquiry but isn't guaranteed.

Can each side of a custom mattress have a different firmness?

Yes. His/Hers is a standard option on the Trilogy in Queen, King and EU Super King, for $229 more. On the other latex models it's a custom order.

How do I measure my bed frame for a custom mattress?

Measure the inside of the frame where the mattress sits: length and width at both ends and in the middle. Add the maximum mattress height (the top of the rail, or the wall-bed limit), the gap between slats, and whether the corners are rounded. If you're still planning the room, the bedroom layout planner helps check the footprint.

05Enquire

Not sure which one to choose?

Tell us who you're shopping for, the bed or cot measurements, and the feel they prefer. We'll help compare the suitable options and check the size before you order.

WhatsApp or call
+65 8974 9376

Mon - Sat, 10am - 7pm

Email
admin@lullaflex.com

Ask about sizes, prices, stock, and delivery

Visit
39 Woodlands Cl, #08-66 MEGA@Woodlands, Singapore 737856

By appointment only

Range
Mattresses, baby sleep products, and pillows

Hybrid and natural latex options for adults, children, and babies.

WhatsApp now